ICAT certified AIS 140 device in India

ICAT certified AIS 140 device in India

Home >> ICAT certified AIS 140 device in India

ICAT certified AIS 140 device in India

  • Sensel Telematics manufactures ICAT certified AIS 140 devices in India. The ICAT certified AIS 140 device is one of its fleet-SMART brand products.
  • This device is compact and lightweight and can be fit into any fleet vehicle and concealed so that it is not easily accessible and avoid accidental or intentional tampering.
  • Fleet managers looking to efficiently track and locate their vehicles in real-time may find this device to be highly beneficial and also manage and optimize the fleet.
  • The device supports over the air firmware update and over the air configuration update as well.

ICAT certified AIS 140 device in India

Product Specifications

AIS 140 GPRS/GSM Specification:

  • Quad Band (850/900/1800/1900 MHz)
  • Mobile station class B supporting GPRS Class 10, coding schemes 1 to 4 and PBCCH
  • Module approvals: fully type approved conforming R&TTE directive, CE, GCF
  • SMS (text/data)
  • 3 GPP Release 4
  • TCP/IP

Output Power:

  • – Class 4 (2W) @ 850/900 MHz
  • – Class 1 (1W) @ 1800/1900 MHz

GSM Sensitivity:

  • ≤- 108 dBm (typ.) @ 850/900 MHz
  • ≤- 107 dBm (typ.) @ 1800/1900 MHz

AIS 140 GPS Specifications:

  • GPS L1 1575.42MHz C/A Code
  • Horizontal Position Accuracy < 2.5 m CEP
  • NMEA-0183

Dimensions

  • 141x78x28 (LxWxH) in mm

Environment Specification:

  • Operating Temperature: -10 deg C to +70 deg C
  • ESD: up to 12kV

Electrical Specification:

  • Input Voltage Range: 8V to 36V
  • Protected against load dumps
  • Current consumption: < 0.5 Amps (avg) at 12V

VTX 10C

ICAT certified AIS 140 device in India
Contact Now
ICAT certified AIS 140 device in India
  • As per the Nirbhaya Act passed by the Government of India, the ICAT certified AIS 140 device in India has a panic button interface that must be enabled in fleet vehicles like cabs carrying passengers, buses, and national permit trucks. This allows the passenger access to press the panic button in case of distress.
  • A slew of other features includes ignition ON/OFF, AC ON/OFF, temperature and humidity sensors, tamper detection and daily distance reports, Overspeed reports, and halt reports which can be effectively monitored by the fleet operators.
  • Driver behavior is recorded by the 3-axis accelerometer and 3-axis gyroscope which detects harsh braking, cornering, and acceleration by the driver. These features and much more make us the one the best manufacturers of ICAT certified AIS 140 device in India.
  • Programmable update rate (> 5 seconds)
  • TCP/IP and HTTP support
  • Internal Antenna (GSM and GPS)
  • 2 LED indicators for GSM and GPS activity
  • Internal Battery with NTC, overvoltage and short circuit protection
  • Tamper detection
  • Harsh Acceleration/Braking/Cornering detection
  • 3-axis accelerometer and 3-axis gyroscope
  • Tilt sensing
  • 1 RS232 port for interface with accessories
  • 2 RPM (Frequency) or Digital Inputs
  • 2 Digital Outputs
  • 2 Analog Inputs
  • Emergency / Panic Button(s) support
  • Memory Storage: up to 60,000 logs
  • 1s data storage for 12 hours
  • Update to 2 IP Addresses
  • Over the Air Firmware update
  • Over the Air Configuration update
  • Embedded SIM support
  • SIM with multiple profile support
  • On-device Geofences support
  • Built-in 1W Audio Amplifier
  • External Antenna
  • Handsfree Voice call kit: Speaker 8ohm 85dB/ Watt/ Meter and Microphone
  • Audio file storage and playback
  • 1 RS232 Port for interface with accessories
  • 1 Analog output (DAC)
  • 1 Digital I/O (configurable)
  • 2 Digital Inputs
  • CAN interface (optional OBD-II connector)